Softline for wall and ceiling - push lock 250x250

The built-in frame is assembled from 4 spot-welded parts. The ends of the frame are mitre-cut, so a seamless transition is guaranteed at the corners. The Softline edge gives the inspection door an exceptional appearance. Two anchoring straps are rotatably mounted on the side parts of the built-in frame. The material they are made of allows trouble-free bending and turning. The anchoring straps have fastening holes at various points. This guarantees optimal placement of the inspection door into the opening in the wall or ceiling. The door is centered on the top and bottom by spacer inserts. The inspection door is provided with a high-quality powder coating.

Scope of delivery: Inspection door including wall fastening anchors, packed in protective film.

Installation instructions: The leaf of the inspection door is unhung and the built-in frame is fitted into the opening in the wall or ceiling. The four movable anchoring straps are adjusted according to local conditions and fastened to the wall or ceiling. The slot between the wall/ceiling and the frame can be filled as needed. This guarantees optimal fastening in masonry or lightweight building structures. Finally, the door leaf is rehung and the door is closed. This operation is no longer possible after installation.

Use: Inspection doors are used mainly in interior spaces. They are suitable for installation in both walls and ceilings.