Softline for wall - square lock 800x800

For sizes 150 x 150 mm to 400 x 400 mm, the built-in frame is made of a single piece. From size 450 x 450 mm, the frame is assembled from 4 spot-welded parts. The ends of the frame are mitre-cut, so a seamless transition is guaranteed at the corners.

The Softline edge gives the inspection door an exceptional appearance.

The holes for the hinges and the slot for the lock are positioned so that the door can be installed on the right or left side. Two anchoring straps are rotatably mounted on the side parts of the frame. The material they are made of allows trouble-free bending and turning. The anchoring straps have fastening holes at various points. This guarantees optimal placement of the inspection door into the opening in the wall or ceiling.

The door is centered on the top and bottom by spacer inserts. The inspection door is provided with a high-quality powder coating.

Scope of delivery: Inspection door including wall fastening anchors, packed in protective film.

Installation instructions: The leaf of the inspection door is unhung and the built-in frame is fitted into the opening in the wall or ceiling. The four movable anchoring straps are adjusted according to local conditions and fastened to the wall or ceiling. The slot between the wall/ceiling and the frame can be filled as needed. This guarantees optimal fastening in masonry or lightweight building structures. Finally, the door leaf is rehung and the door is closed.

Caution when installing in a ceiling: the inspection door is suitable for ceiling installation only up to size 600 x 600 mm.

Use: Inspection doors are used mainly in interior spaces. They are suitable for installation in both walls and ceilings.